Tools and Jigs

Not much much to show here -- Yet!  I have made a rim busting tool.  I welded a ground down 5/8" bolt to a 2" piece of angle iron.  For extra strength I welded in a piece of 1" square tube.  If your making one be sure not to grind down your bolt to much -- you should have to bang this into the hole giving a nice tight none slipe fit.  I ground my bolt to small and had to add some weld and regrind.  It only took a couple of bangs with a hammer to work this one loose.  This tool is a variation of Brad Grahams design from AtomicZombie.